FRONT LOWER SILL TAPE LEFT HAND PROTECTOR

NEW GENUINE ASTON MARTIN CLEAR SELF ADHESIVE STONE CHIP PAINT PROTECTOR FRONT LOWER LEFT SIDE TAPE NUMBER 28 IN THE PARTS DIAGRAM FOR DB9 2009 ONWARDS - COUPE & VOLANTE MODELS INSTALLING: Clean the surfaces, ideally with a degreaser Spray the film with the fitting solution (water & soap), whilst removing the backing Do not touch the adhesive side when dry, as this will leave marks Spray your fingers with the fitting solution before removing the backing Lay the film onto the bodywork and slide into position to match the diagram supplied Once happy with its location, spray with fitting solution so the squeegee will slide across it, before slowly using the squeegee to apply pressure and push out the air and moisture from below the film For curved sections, apply some stretching force to get the contours of the bodywork and avoid creasing If you are unhappy with the position, remove and start again Continue working the film with the squeegee until all air bubbles are out and the edges are securely in place, if any edges are not sticking down, apply some pressure with your thumb for a few seconds Finally, use a heat gun or a hair dryer will also work, to slowly warm the film and ensure adhesion, especially on the edges THERE ARE SOME GREAT YOUTUBE VIDEOS ONLINE WHICH MAY HELP